VC-454 and Deutz F3L    

8029 PHLOX ST.

DOWNEY, CA. 90241

1-800-421-7545

sales@thompsontank.com

 

Home Tanks Parts Pumps Services Technical Info

thompson vc-454 & Deutz f3l-914

Thompson Model "VC" -454 Vacuum-Pressure Pump

A 1190 Sub-base with four (4) 1134 vibration proof mounts, upon which a Thompson VC-454 Vacuum-Pressure Pump, rated at 236 CFM at 900 R.P.M., 28" Mercury and 50 P.S.I. continuous duty, is mounted by means of a front and rear mount plate. 

·         2:1 Clutch reduction gear.          

·         Centaflex coupling with guard.

·         Vacuum-Pressure manifold with a 3" 4-way valve (full area) and air operator.

·         Pressure relief valve - 1 1/4" adjustable.

·         Vacuum relief valve - not required.          

·         Vacuum-Pressure gauge - 30/60

·         1 - JVC oil pressure gauge 0-80 P.S.I.

·         2 - JVC oil sight gauge.

·         1129-3 separator silencer.          

·         Thompson VC platform mount plates.

Deutz F3L-914 Air Cooled Diesel Power Unit, Direct Drive, Rated at 55 HP.

·         Emergency belt drive shutdown and guard.

·         Manifold muffler, spark arrestor, and rain cap

·         Dry type air cleaner.

·         Remote engine shutdown.

·         12 Volt starter and alternator

·         Locking throttle control.

·         Cold start with indicator            

·         Deutz platform mount plates.

Deutz Weather Proof Control Panel with Vibration Proof Mounts and Plug in Wire Harness.

·         Tachometer and hourmeter.

·         Starter switch, keyed with indicator light.

·         Oil pressure switch gauge with automatic fuel shut-down.

·         Temperature switch gauge with automatic fuel shut-down.         

Shipping weight

·         2000 pounds (lbs.) approximate

Dimensions

·         Length - 90" (inches) approximate.          

·         Width - 35" (inches) approximate.

·         Height - 38" (inches) approximate.

 

 

 

Home Back Feedback Site Map Search About Us Contact Us F.W.F.

Send mail to jrthompson@thompsontank.com with questions or comments about this web site.
Copyright © 2004 Thompson Tank Inc.
Last modified: October 13, 2005